Frame:

1. Full frame or unibody and must have a wheelbase of 108 inches min.
2. No underslung rear frames allowed.

Engine:

1. Engine must match manufacturer of body

Front suspension:

1. Tubular a-arms allowed (top only)

Rear suspension:

1. Rear suspension must remain stock with the following exceptions:
2. Aftermarket shocks allowed.
3. Shocks may be relocated.
4. Coil-over shocks are allowed
5. Weight jacks are allowed
6. Unibody frames may be tied together

Rear end:

1. Any passenger car or 1/2 ton truck rear end allowed.
2. Locked allowed.
3. Floaters allowed.
4. Must have min. 1 inch wheel studs with min. 1/16ths inch exposed when wheel is mounted on car.

Steering:

1. Steering box must be in stock location.
2. Steering must be quick release style.
3. No driver adjustable components of any kind allowed.

Wheels:

1. 15x8 inch maximum.
2. Bead lock allowed on right rear only.

tires:

1. Any D.O.T. stamped tire allowed.
2. Any American Racer IMCA approved tire allowed.
3. Max. 11 inches measured sidewall to sidewall
4. Cross grooving is allowed.

Transmission:

1. Any manually shifted 3 or 4 speed.
2. Any automatic with fully working torque converter.
3. Transmission must have at least 2 forward and one reverse gear.

Brakes:

1. Brakes must be in good working condition. Brakes must be able to lock all 4 wheels.

Engine:

1. No cubic inch limit.
2. No roller cams allowed.
3. No aluminum heads allowed.

Exhaust:

1. Headers with collectors required.
2. Must point towards rear of car.

Clutch (if used):

1. Single disk clutches allowed.
2. Muti-disk clutches allowed.
3. Couplers allowed.
4. Flywheel must have explosion proof housing.

Starter:

1. All cars must have starters and be self starting.

Carburator:

1. Only one carburator allowed.
2. 2 barrel allowed.
3. 4 barrel allowed.

Fuel Cell:

1. Must be approved type
2. Must be mounted securely inside of trunk.
3. Must be enclosed in a steel box with a locking type cap.

Fuel pump:

1. Must be manual type, mechanically driven.
2. No belt driven pumps allowed.
3. No electrical pumps allowed.

Battery:

1. Must be completely covered or enclosed.
2. Must pass safety inspection.

Seats:

1. Must be of approved type.
2. Must be made of aluminum.
3. Must pass saftey inspection.

Weights:

1. All added weight must be securely fastened. must pass safety inspection